quarta-feira, 10 de outubro de 2018

IMMERSED HYDROELECTRIC


IMMERSED HYDROELECTRIC

INTRODUCTION

Alternative generation of electric energy through the pressure of large masses of water. Introducing the development of the technology of hydroelectric power immersed for energy production.

OBJECTIVES

Ø  Utilization hydrostatic pressure to produce thermal energy and convert it into electrical energy.
Ø  Develop the technology of immersed hydroelectric that make use of the hydrostatic potential of the sea, ocean or lacustrine natural or artificial.

THEORY

The theoretical basis and concepts derived from physics to develop the technology of the marine hydroelectric are four main sets:
Ø  Stevin's Theorem
Ø  Kinetic theory of gases
Ø  Pascal's Theorem
Ø  Electromagnetic induction.

FUNCTIONING

The immersed hydroelectric use the hydrostatic pressure of deep water masses to compress a gas. This compressed gas raises its internal energy by increasing both temperature and pressure. All this thermal energy that the system releases in the surrounding environment is used to boil water with this there is the production of water vapor that moves a turbine and that one generator thus converting the mechanical energy into electrical energy.

In figure 01 structural sketch of an immersed hydroelectric

Main parts:
ؠؠ Metal Columns X
Ø  Metal Columns Y
Ø  Gas chamber X
Ø  Gas chamber Y
Ø  Structure with water that connects the two columns.
Ø  Upper Plunger X
Ø  Lower plunger X
Ø  Upper Plunger Y
Ø  Lower plunger Y
Ø  Boiler
Ø  Valves: A.B.C.D.E.
Ø  External structure.
Ø  Turbine
Ø  Generator
Ø  Condenser
Ø  Water storage Tank







Operating in the Sense Column X for Column Y. figure 02.





The "A" valve opens and the water enters filling the entire Water Column "X", exerting a pressure on the upper plunger of this column, this in turn compresses the gas from the chamber of this column. Because of this great pressure suffered by the gas happens two simultaneous situations:
1). The temperature increases and a great amount of heat is released to the boiler with water, making the same boil generating water vapor that will move the turbine and that the generator producing electricity.
2º). The gas pressure forces the lower plunger to come down and presses the equilibrium liquid which according to the Pascal principle (hydraulic press) also pushes the lower plunger of the "Y" column upwards.
The lower plunger of the "Y" column presses gas from the chamber of this column by compressing it by generating heat and pushing the top plunger of the "Y" column upwards. With this, part of the water that is in the "Y" Water column rises up to the level and triggers a sensor that opens valve "B". An electronic system immediately closes valve "A" and also opens valve "C" and part of the water from "X" water column is thrown into the boiler. Finishing the operation in this direction.



Operating in the Sense Column Y for Column X. figure 03.




When the "B" valve opens the entire Water Column "Y" is filled with water and the process will now repeat in the reverse direction ie the Water Column "Y" for the Water Column "X ".
Electronic Valve Control:
When valve "A" opens, valve "B" closes and valve "C" opens by flushing water from the "Y" column in the boiler.
When valve "B" opens, valve "A" closes and valve "D" opens by flushing water from column "X" in the boiler.
The valve "E" serves to control the salinity.

CONSIDERATIONS

The implantation of immersed hydroelectric plants is mainly in seas and oceans, in the continental shelf that the depth turns around 0 to 500m. But it can settle in deep natural or artificial lakes within the continents.
In the same boiler you can place several pairs of columns. Thus increasing the production of steam and consequently the generation of energy by the turbine and generator system.

Nenhum comentário:

Postar um comentário