quarta-feira, 10 de outubro de 2018

IMMERSED HYDROELECTRIC


IMMERSED HYDROELECTRIC

INTRODUCTION

Alternative generation of electric energy through the pressure of large masses of water. Introducing the development of the technology of hydroelectric power immersed for energy production.

OBJECTIVES

Ø  Utilization hydrostatic pressure to produce thermal energy and convert it into electrical energy.
Ø  Develop the technology of immersed hydroelectric that make use of the hydrostatic potential of the sea, ocean or lacustrine natural or artificial.

THEORY

The theoretical basis and concepts derived from physics to develop the technology of the marine hydroelectric are four main sets:
Ø  Stevin's Theorem
Ø  Kinetic theory of gases
Ø  Pascal's Theorem
Ø  Electromagnetic induction.

FUNCTIONING

The immersed hydroelectric use the hydrostatic pressure of deep water masses to compress a gas. This compressed gas raises its internal energy by increasing both temperature and pressure. All this thermal energy that the system releases in the surrounding environment is used to boil water with this there is the production of water vapor that moves a turbine and that one generator thus converting the mechanical energy into electrical energy.

In figure 01 structural sketch of an immersed hydroelectric

Main parts:
ؠؠ Metal Columns X
Ø  Metal Columns Y
Ø  Gas chamber X
Ø  Gas chamber Y
Ø  Structure with water that connects the two columns.
Ø  Upper Plunger X
Ø  Lower plunger X
Ø  Upper Plunger Y
Ø  Lower plunger Y
Ø  Boiler
Ø  Valves: A.B.C.D.E.
Ø  External structure.
Ø  Turbine
Ø  Generator
Ø  Condenser
Ø  Water storage Tank







Operating in the Sense Column X for Column Y. figure 02.





The "A" valve opens and the water enters filling the entire Water Column "X", exerting a pressure on the upper plunger of this column, this in turn compresses the gas from the chamber of this column. Because of this great pressure suffered by the gas happens two simultaneous situations:
1). The temperature increases and a great amount of heat is released to the boiler with water, making the same boil generating water vapor that will move the turbine and that the generator producing electricity.
2º). The gas pressure forces the lower plunger to come down and presses the equilibrium liquid which according to the Pascal principle (hydraulic press) also pushes the lower plunger of the "Y" column upwards.
The lower plunger of the "Y" column presses gas from the chamber of this column by compressing it by generating heat and pushing the top plunger of the "Y" column upwards. With this, part of the water that is in the "Y" Water column rises up to the level and triggers a sensor that opens valve "B". An electronic system immediately closes valve "A" and also opens valve "C" and part of the water from "X" water column is thrown into the boiler. Finishing the operation in this direction.



Operating in the Sense Column Y for Column X. figure 03.




When the "B" valve opens the entire Water Column "Y" is filled with water and the process will now repeat in the reverse direction ie the Water Column "Y" for the Water Column "X ".
Electronic Valve Control:
When valve "A" opens, valve "B" closes and valve "C" opens by flushing water from the "Y" column in the boiler.
When valve "B" opens, valve "A" closes and valve "D" opens by flushing water from column "X" in the boiler.
The valve "E" serves to control the salinity.

CONSIDERATIONS

The implantation of immersed hydroelectric plants is mainly in seas and oceans, in the continental shelf that the depth turns around 0 to 500m. But it can settle in deep natural or artificial lakes within the continents.
In the same boiler you can place several pairs of columns. Thus increasing the production of steam and consequently the generation of energy by the turbine and generator system.

Usinas hidroelétricas imersas


HIDROELÉTRICAS IMERSAS

INTRODUÇÃO

Geração alternativa de energia elétrica através da pressão de grandes massas d’agua. Apresentando o desenvolvimento da tecnologia de usinas hidroelétricas imersas para produção de energia.

OBJETIVOS
Ø Utilizar a pressão hidrostática para produzir energia térmica e converter essa em energia elétrica.
Ø Desenvolver a tecnologia de usinas hidroelétricas imersas que faça o aproveitamento do potencial hidrostático marítimo, oceânico ou lacustre natural ou artificial.

TEORIA
O embasamento teórico e conceitos oriundos da física para desenvolver a tecnologia das usinas hidroelétricas imersas são quatro conjuntos principal:
Ø Teorema de Stevin
Ø Teoria cinética dos gases
Ø Teorema de Pascal
Ø Indução eletromagnética.


FUNCIONAMENTO
As usinas hidroelétricas imersas utilizam da pressão hidrostática de profundas massas d’água para comprimir um gás. Esse gás comprimido eleva sua energia interna aumentando tanto a temperatura como a pressão.  Toda essa energia térmica que o sistema libera no ambiente ao redor é utilizada para ferver agua com isso há a produção de vapor d’agua que movimenta uma turbina e essa um gerador convertendo assim a energia mecânica em energia elétrica.

Na figura 01 temos o esboço estrutural de uma Usina hidrelétrica.
Partes principais:
Ø Colunas Metálicas X e Y.
Ø Câmaras de gás das Colunas X e Y.
Ø Estrutura com agua que liga as duas colunas.
Ø Êmbolos das colunas X e Y.
Ø Caldeira
Ø Válvula A.B.C.D.E.
Ø Estrutura externa.
Ø Exaustor de vapor.
Ø Turbina
Ø Gerador










Funcionamento no Sentido Coluna X para Coluna Y. figura 02.



A válvula “A” abre e a água entra preenchendo toda Coluna d’Água “X”, exercendo uma pressão sobre o êmbolo superior desta coluna, este por sua vez comprime o gás da câmara desta coluna. Por causa dessa grande pressão sofrida pelo gás acontece duas situações simultâneas:
1º). A temperatura aumenta e uma grande quantidade de calor é liberado para a caldeira com agua, fazendo a mesma ferver gerando vapor d’agua que irá mover a turbina e essa o gerador produzindo energia elétrica.
2º). A pressão do gás força o êmbolo inferior a descer e pressiona o liquido em equilíbrio que de acordo com o princípio de Pascal (prensa hidráulica) também empurra o êmbolo inferior da coluna “Y” para cima.
O êmbolo inferior da coluna “Y” pressiona o gás da câmara desta coluna comprimindo-o fazendo gerar calor e empurrado o êmbolo superior da coluna “Y” para cima. Com isso parte da agua que estar na Coluna d’agua “Y” sobe até o nível e acionar um sensor que abre a válvula “B”. Um sistema eletrônico imediatamente fecha a válvula “A” e também abre a válvula “C” e parte da agua da Coluna d’agua “X” é lançada na Caldeira. Finalizando o funcionamento neste sentido.

Funcionamento no Sentido Coluna Y para Coluna X. figura 03.



No momento que a válvula “B” abre toda a Coluna D’agua “Y” é preenchida por água e o processo irá se repetir agora do sentido inverso ou seja da Coluna d’agua “Y” para a Coluna d’agua “X”.
Controle eletrônico das Válvulas:
Quando a válvula “A” abre, a válvula “B” fecha e a válvula “C” abre lançando agua da coluna “Y” na caldeira.
Quando a válvula “B” abre, a válvula “A” fecha e a válvula “D” abre lançando agua da coluna “X” na caldeira.
A válvula “E” serve para controla a salinidade.

CONSIDERAÇÕES

A implantação de hidrelétricas imersas é principalmente em mares e oceanos, na plataforma continental que a profundidade gira em torno de 0 até 500 m. Porém pode se instalar em lagos naturais ou artificiais profundos dentro dos continentes.
Em uma mesma caldeira pode colocar vários pares de colunas. Aumentando assim a produção de vapor e consequentemente a geração de energia pelo sistema turbina e gerador.